
Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
10.Okt.2006
14
Service Manual 7373 RM-209
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(26)
9. Also, protect the inner side of the window with a plastic film.
10. Carefully unlock the
BOARD TO BOARD CONNECTOR
.
11. Unlock four clips at the
B-COVER,
which hold the
UI-SHIELD
into the
B-COVER
.
12. Do not damage the
LCD connector
when opening.
13. Open the four clips which hold the
LCD
into the
UI-SHIELD
.
Do not bend the clips too much to keep the part reusable for
assembly.
14. Lift out the
LCD
.
15. To avoid dust and scratches, protect the
LCD
with a plastic
film.
16. Open the two Torx Plus® size 6 screws in the following order.
For assembly use the reverse order and apply a torque of 25
Ncm +/- 2Ncm
.
Always use new screws!