7368 ISAM ONT G-240W-C Product Guide
Configure a G-240W-C indoor ONT
Issue: 01
Edition 01
113
3
Click Save.
4
STOP. This procedure is complete.
Procedure 35
NTP configuration
1
Select Application > NTP from the top-level menu in the GPON Home Gateway window, as
shown in Figure
.
Figure 55
NTP window
Table
describes the fields in the NTP window.
Table 45
NTP parameters
2
Configure NTP.
Field
Description
Enable NTP Service
Select this checkbox to enable NTP service
Current Time
Enter the current local date and time
First Time Server
Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Second Time Server
Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Interval Time
Interval at which to get the time from the time server, in seconds
Time Zone
Choose the local time zone from the drop-down menu
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01