7368 ISAM ONT E-240W-A Product Guide
Configure an E-240W-A indoor ONT
Issue: 01
3FE-46974-AAAA-TCZZA
97
Procedure 24
GRE Tunnel configuration
1
Select Network > GRE Tunnel from the top-level menu in the EPON Home Gateway window,
as shown in Figure
.
Figure 40
GRE Tunnel window
Table
describes the fields in the GRE Tunnel window.
Table 26
GRE Tunnel parameters
Field
Description
Tunnel Name
Choose Create new GRE Tunnel, or Choose an existing tunnel from the
drop-down menu.
The tunnel name is automatically assigned by the system.
Up to 3 GRE tunnels are supported.
WAN Interface
Choose a WAN interface from the drop-down menu.
GRE tunnels can only be created on HSI-enabled WAN interfaces.
Primary Remote End
Secondary Remote End (optional)
Enter an IP address or FQDN that is unique in the system.
If the primary remote endpoint is down or unreachable, the secondary
remote endpoint becomes active, if configured.
The secondary remote endpoint remains active until it becomes
unreachable, in which case the primary remote endpoint becomes active
again. Revertive mode is not supported.
If both endpoints are unreachable, the GRE tunnel is declared down.
(1 of 2)
Release 06.00.00h | January 2019 | Edition 08