7368 ISAM ONT BGW320-505 Product Guide
ANSI ONT safety guidelines
Issue: 01
3FE-47753-AAAA-TCZZA
17
2.2.1
EMC, EMI, and ESD standards compliance
The ONT equipment complies with the following requirements:
•
Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B,
Subpart C, and Subpart E, Class A requirements for OLT equipment
•
SPS-1019_Reliability_Env_Mech v2_5_REL_07-17-17, including sections:
•
3.3 ESD Test
•
3.4 Surge Test
•
6.8 EMC Shielding
•
8.13 FCC Certification - Intentional Radiators
•
8.14 FCC Certification - Unintentional Radiators
•
EN 61000-4-4 Testing and measurement techniques - Electrical fast
transient/burst immunity test
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is needed.
•
Consult the dealer or an experienced radio/TV technician for help.
2.2.2
Equipment safety standard compliance
The ONT equipment complies with the requirements of UL60950-1 and Indoor ONTs
to Information Technology Equipment (ITE).
Release 06.02.00b | October 2019 | Edition 01