WCDMA RX chain activation for manual measurement
Steps
1. In Phoenix, select Testing
→
WCDMA
→
Rx Control . The Phoenix Rx Control window opens.
Figure 17 Phoenix Rx Control window with sample settings (WCDMA band I)
2. Make settings for the band to be tested according to the following table:
Band to be tested
Phoenix Channel
Signal generator to antenna
connector
WCDMA I
10700
2141 MHz
WCDMA II
9800
1960 MHz
WCDMA V
4408
881.6 MHz
WCDMA VIII
3013
943.6 MHz
3. Make the following general settings (the same values for all bands):
Setting
Value
AGC Mode
Algorithm
AFC Algorithm
OFF
AFC DAC
1024
4. Click Start to activate the settings.
RM-598; RM-604
RF Troubleshooting
Issue 1
COMPANY CONFIDENTIAL
Page 4 –13
Copyright © 2009 Nokia. All rights reserved.
Содержание 7230
Страница 103: ...4 RF Troubleshooting Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 4 1 Copyright 2009 Nokia All rights reserved ...
Страница 135: ...5 System Module Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 5 1 Copyright 2009 Nokia All rights reserved ...
Страница 159: ...Glossary Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2009 Nokia All rights reserved ...