background image

 

6260 Slide RM-368

Service Manual Level 1&2

 

Confidental 

Copyright © 2009 NOKIA. All rihts reserved 

ISSUE 1 

 

2.

 

COPYRIGHT 

Copyright © 2009 Nokia. All rights reserved. 
 
Reproduction, transfer, distribution or storage of part or all of the contents in this document in 
any form without the prior written permission of Nokia is prohibited. 
 
Nokia, Nokia Connecting People, and Nokia X and Y are trademarks or registered trademarks of 
Nokia Corporation. Other product and company names mentioned herein may be trademarks or 
tradenames of their respective owners. 
 
Nokia operates a policy of continuous development. Nokia reserves the right to make changes 
and improvements to any of the products described in this document without prior notice. 
 
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, 
incidental, consequential or indirect damages howsoever caused. 
 
The contents of this document are provided “as is”. Except as required by applicable law, no 
warranties of any kind, either express or implied, including, but not limited to, the implied 
warranties of merchantability and fitness for a particular purpose, are made in relation to the 
accuracy, reliability or contents of this document. Nokia reserves the right to revise this 
document or withdraw it at any time without prior notice. 
 
The availability of particular products may vary by region. 
 
IMPORTANT 
 
This document is intended for use by qualified service personnel only. 

Содержание 6260 slide





















Отзывы: