Nokia 500i, Руководство по установке

Страница: 37 / 80

Performing the Initial Hardware Configuration
Nokia 500i Installation Guide 37
! Make sure the chassis assembly is pushed all the way in from the front of
the gateway.
!
Make sure that power is turned on to the power strip or wall receptacle
that you plugged the gateway in to.
If the fans are still not running, or if the power LED does not illuminate,
contact your Nokia service provider as listed in
Nokia Contact Information on
page 3 for technical support.
System Status LEDs
You can monitor the basic operation of the gateway and network interface
cards (NICs) by checking their status LEDs. The system status LEDs are
located on the front panel of the gateway.
Figure 5 Status LED Location
00307d
E
SD
CO M M O
N
P
O
IN
T GR O U
N
D
Power status
Fault Warning