Nokia 446PRO, Руководство по обслуживанию, Страница: 20 / 59

446F 18
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
CONTRAST
MIN CONTRAST
MAX CONTRAST
BRIGHTNESS
G2
RED BLACK LEVEL
GREEN BLACK LEVEL
BLUE BLACK LEVEL
RED AMP.
GREEN AMP.
BLUE AMP.
BCL ADJUST
EXIT
00: 1280x1024 85HZ
MODEL: HP P1110
SERIAL NUMBER FI92500061
POWER ON HOURS 23
STAND--- BY HOURS 0
SUSPEND HOURS 0
ACTIVE--- OFF HOURS 0
FIRMWARE 0.19
EXIT
TYPE : O
CUSTOM COLOR: 1
DDC : EXT (24LC21)
INITIALIZE EEPROM
INIT BURN IN TEST
EXIT
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
VERTICAL CONV
HORIZONTAL CONV
MOIRE
EXIT
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
00: 1280x1024 85HZ
00: 1280x1024 85HZ
00: 1280x1024 85HZ
4.2.4. Memory settings and Initializing the Replacement IC204 on SMA board
If the memory for factory adjustments is replaced, it must be initialized. During initializing all memory
locations are written with approximate values. They must be updated in service mode as explained
in the chapter ’Adjustment Procedure’.
- INTIALIZE EEPROM always with using display mode no 00! (91.376 kHz/85 Hz (GTF642))
- After initializing switch OFF the monitor.
- Activate service mode as explained before.
- Select Memory settings ---menu.
- Select Monitor type O, custom color 1 and DDC (EXT (24LC21)
Caution
Initializing of a programmed memory IC deletes all user and factory made adjustments.
4.2.5. Storing the Adjustments
When the adjustment is ready, return to the menu by pushing the button. Adjustement will be
stored automatically.
4.2.6. Exit from Service Mode
Switch off the monitor.
4.2.7. Uninstalled EEPROM
If you have uninstalled EEPROM. You can not adjust in user menu. You have to go first in service
menu and select Memory settings --- Initialize EEPROM.