![Nokia 3610 fold Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/nokia/3610-fold/3610-fold_user-manual_252746019.webp)
19
C a l l s
3. To end the call or to cancel the call attempt, press the end key, or close the phone.
For a shortcut to recently dialled numbers, press the call key once in the standby mode. To
call the number, select a number or name, and press the call key.
Answer or reject a voice call
To answer a call, press the call key. To end the call, press the end key.
To reject a call, press the end key.
To mute the ringing tone, select
Silence
. Then answer or reject the call.
Speed dialling
Assign a phone number to one of the sped dialling keys, 2-9. See “Speed dialling”, p. 29. Call
the number in either of the following ways:
•
Press a speed-dialling key, then the call key.
•
If speed dialling is activated, press and hold a speed dialling key until the call begins. See
Speed dialling
Enhanced voice dialling
Voice dialling allows you to make a call by saying a name in the contact list. Voice
commands are not language-dependent. To set the language, see
Voice recognition
language
Note:
Using voice tags may be difficult in a noisy environment or during an
emergency, so do not rely solely upon voice dialling.
1. In the standby mode, press and hold the volume key down. A short tone sounds, and
Speak now
is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list with
matches is shown. The phone plays the voice command of the match on the top of the
list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar to voice dialling.
See
Voice commands
■
Call waiting
To answer the waiting call during an active call, select
Answer
. The first call is put on hold.
To end the active call, press the end key. To switch back to the first call without ending the
second call, select
Options
>
Swap
.
To activate the
Call waiting
function, see “Call”, p. 35.
RM429_EN_820.fm Page 19 Thursday, August 21, 2008 5:12 PM