[ 73 ]
Personalize your phone
12
Set the default profile
When you use the headset, car kit or loopset, you have the option of
choosing a profile. You can use the currently selected profile (for example,
Normal
) or you can choose from the list.
1
Press
Menu
4 6 (
Settings
>
Accessory settings
).
2
Scroll to
Headset
,
Handsfree
or
Loopset
, then press
Select
.
3
Scroll to
Default profile
, then press
Select
.
4
Scroll to the profile you want, then press
Select
.
Set up the car profile
If you are using your phone with a Nokia-approved car kit, you can set
lights to
On
(lights stay on) or
Automatic
(after 15 seconds, lights turn
off until the next key is pressed or the phone rings).
Set up the loopset profile
The LPS-3 Loopset gives people with T-coil equipped hearing aids the
ability to make and receive calls without noise interference.
Important:
Refer to the booklet that comes with the LPS-3 for
complete instructions and safety information.
1
Plug the loopset jack into the bottom of
your phone, as shown in the illustration.
2
Press
Menu
4 6 3 (
Settings
>
Accessory
settings
>
Loopset
).
3
Scroll to
Use
loopset
, then press
Select
.
4
Scroll to
Yes
, then press
Select
.
Note:
If you want to use the headset or
TTY, you need to follow steps 2-3 above, then select
No
to
deactivate the loopset profile.
Loopset
