Nokia 002P1V9, Руководство пользователя, Страница: 118 / 148

Date and time settings
Select Menu
>
Tools
>
Settings
>
General
>
Date
and time .
To set the current date and time, select Date and
Time .
To define your time zone, select Time zone .
To update the time, date, and time zone information
automatically (network service), select Network
operator time
>
Auto-update .
To select whether to use the 12-hour or 24-hour clock
system and with which symbol to separate hours and
minutes, select Time format and Time separator .
To determine the date format and separator, select
Date format and Date separator .
To define the clock type, select Clock type
>
Analogue or Digital .
To select the tone for the alarm clock, select Clock
alarm tone .
To determine the week days that are work days for you,
select Workdays .
Enhancement settings
Select Menu
>
Tools
>
Settings
>
General
>
Enhancement .
Common enhancement settings
With most enhancements, you can do the following:
To determine which profile is activated when you
attach an enhancement to your device, select the
enhancement and Default profile .
To let the device answer phone calls automatically after
5 seconds when an enhancement is attached, select
Automatic answer
>
On . If the ringing type is set to
Beep once or Silent in the selected profile, the
automatic answer is disabled.
To illuminate the device while it is attached to an
enhancement, select Lights
>
On .
E-mail key settings
To select which mailbox to open with the e-mail key,
select E-mail key settings
>
E-mail key , and press
the scroll key.
Security settings
Select Menu
>
Tools
>
Settings
>
General
>
Security .
Define the following security settings:
• Phone and SIM card — Adjust the security settings
for your device and SIM card.
• Certificate management — Manage your security
certificates.
• Security module — Manage your security module.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialling of the
emergency number. Codes are shown as asterisks.
When you change a code, enter the current code, then
the new code twice.
118
Se
ttings