Connections
30
Remote SIM mode
—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select
On
. For more
information, see ‘Remote SIM mode’, p. 31.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth
>
Off
or
My phone's visibility
>
Hidden
. In this
way, you can better control who can find your device with
Bluetooth wireless technology, and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
For Bluetooth connectivity indicators, see ‘Essential
indicators’, p. 28.
Tip!
To send text using Bluetooth connectivity, open
Notes
, write the text, and select
Options
>
Send
>
Via
Bluetooth
.
1
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open
Gallery
.
2
Select the item and
Options
>
Send
>
Via Bluetooth
.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons:
computer,
phone,
audio or
video device, and
other device.
To interrupt the search, select
Stop
.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 30.
5
When the connection has been established,
Sending
data
is shown.
Tip!
When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820#
in the standby mode.
Pair devices
To pair with compatible devices and view your paired
devices, in the
Bluetooth
application main view, press
.
Before pairing, create your own passcode (1-16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a
factory-set passcode. The passcode is used only once.
