Nokia 002B9M3 - N81 Smartphone - WCDMA, Руководство пользователя

Страница: 95 / 139

Make
calls
95
Accept —to activate the sharing session.
Reject —to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press the end key to decline the sharing session and
disconnect the voice call.
When you are receiving a video clip, to mute the sound of
the clip, select
Mute .
To end video sharing, select Stop . Video sharing also ends
if the active voice call ends.
Answer or decline a call
To answer the call, press the call key, or open the slide.
To mute the ringing tone when a call comes in, select
Silence .
If you do not want to answer a call, press the end key. If
you have activated the
Call divert > If busy function to
divert calls, declining an incoming call also diverts the call.
See ‘Call divert’, p. 119.
When you select Reject to reject an incoming call, you can
send a text message informing the caller that you cannot
answer the call. Select
Options > Send text message . To
set up this option and write a standard text message, see
‘Call’, p. 118.
Answer or reject a video call
When a video call arrives, is displayed.
Press the call key to answer the video call. Allow video
image to be sent to caller? is displayed. To start sending
a live video image, select Yes .
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen replaces the video image.
To replace the grey screen with a still image captured by
the camera in your device, see ‘Call’,
Image in video call ,
p. 118.
To end the video call, press the end key.
Call waiting
You can answer a call while you have another call in
progress if you have activated
Call waiting in Tools >
Settings > Phone > Call > Call waiting (network service).
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap . To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Options >
Transfer . To end the active call, press the end key. To end
both calls, select Options > End all calls .