Nokia Siemens Networks Flexi Lite BTS, Описание продукта, Страница: 22 / 25

22 DN09145453
Flexi Lite BTS Product Description
Id:0900d805809fcf8b
Confidential
Interfaces and LEDs
13 Interfaces and LEDs
Table 2 lists the interfaces available in Flexi Lite BTS. Additionally, Flexi Lite BTS
contains three LEDs which indicate the status of the BTS. Note that all connectors and
LEDs are available on the front panel.
Figure 6 Flexi Lite BTS interfaces
GND
ANT-1
TRS SYNC LEDs LMP SFP EAC
ANT-2 PE ON/STBY
LED
Name Label on
module
Connector type Description
Antenna interface 1
Tx/Rx ANT-1 N-type, Female RF signal interface to antenna
(Tx and Rx)
Antenna interface 2
Tx/Rx ANT-2 N-type, Female RF signal interface to antenna
(Tx and Rx)
Power supply PE Pluggable 3-pin
screw terminal AC power supply input
GND GND M5 and M8 screws Grounding
Transport interface 1 TRS RJ-45 100/1000 Base-T with P+E (electrical)
Transport interface 2 SFP SFP 100/1000 Base-X (optical)
Synchronization
input SYNC HDMI Synchronization input
Local Management
Port LMP RJ-45 1000 Base-T
External Alarms and
Controls EAC HDMI Alarms and control signals:
•
six dedicated alarm inputs
•
two selectable alarm inputs or control outputs
Reset button - - BTS reset
Accessible only if the IP seal of the Ethernet con-
nector is removed
Table 2 Flexi Lite BTS front panel connectors and interfaces