noken FUSION, Руководство пользователя

Страница: 16 / 20

16
Equipment Action Troubleshooting Possible cause User solution Autoritzet technical service
AIR
Press air massage
push-button with led
Button light OFF, air massage OFF Diferential switch or magnetothermic off Connect the differential switch or magnetothermic -
Button light OFF, air massage ON Faulty push-button - Change the push-button
Button light ON, air massage OFF
Defective blower or connections -
Check connections and messure the blower input
(230V AC)
Check the noise
Change the blower(if applicable)
Problem with the electronical box -
Check connections
Change the electronical box
Eficiency reduction of the massage Jet clogged or dirty Clean -
Equipment Action Troubleshooting Possible cause User solution Authoritzed technical service
HYDRO
Press hydromassage
push-button with led
Button light OFF and water
massage OFF
Differential switch or magnetothermic OFF Connect the differential switch or magnetothermic -
Button light OFF but water
massage ON
Faulty push-button - Change the push-button
The hydromassage stopped a few
seconds when starting or during
the process
Incorrect water level Fill the bathtub above the starting level -
Faulty level sensor - Change level sensor
Faulty electrical box - Change the electronical sensor
The button light is ON for a few
seconds but the hydromassage
does not work
No electricity current at the whirlpool pump -
Check connections and measure the whirlpool pump
input (230 VAC). Change if necessary.
Problem with the whirpool pump -
Check connections and measure the whirlpool pump
input (230 VAC)
Check the noise
Change the whirlpool pump (If applicable)
Problem with the electronical box -
Check connections
Change the electronical box
Efficiency reduction of the
hydromassage
Jet/vacuum protection cover clogged or dirty Clean -