Interface - LFO
Int/Ext
is switch selects the burst clock source between the internal LFO or an external
clock.
In - Jack 0-8v
In internal LFO mode this jack is a 1v/8va CV for the internal LFO and has 8
octaves of range. In external mode, it is a clock input. Burst gate length follows
both rising and falling edges so clock duty cycle is maintained between LFO, Out
and End.
Tmp/Div - Knob
In internal LFO mode, this knob controls the LFO tempo. It allows 4 octaves of
control. In external mode, it is a controllable clock divider with 1-32 divisions.
Fst/Slw - Toggle
is switch controls the base tempo of the internal LFO. It is a three-position
switch. Each position is half tempo of the position above. e lowest tempos in
each range are: 1/2Hz (30 BPM), 2Hz (120 BPM) and 8Hz (480 BPM).
Out - Jack
is jack outputs the LFO used for burst generation.
3
Noise Engineering
Variatic Erumption
Dual-Burst Generator with built-in LFO
