Use the
+
and
-
buttons to set the current hour, then press
The Minutes will now be flashing .
Use the
+
and
-
buttons to set the current hour, then press
Prog
OK
to confirm.
Prog
OK
to confirm.
The Day will now be flashing.
Set the current day (i.e. 1 for Monday, 2 for Tuesday, etc.), then press
The time and day are now set.
Prog
OK
Prog
to confirm.
To display the current time during normal operation, briefly press the
will be displayed for 3 seconds.
PROGRAMMING THE TIMER
OK
button. The time
It is possible to set up to 3 On/Standby periods per day using the timer mode. Each day can
be programmed individually or all days can be programmed at once.
Prog
Press the
OK
button for 3 seconds to enter the programming mode
The Day will now be blinking
Use the
+
and
-
buttons scroll to the required day. Note that after Day 7,
‘ALL’
will be
displayed. Use this setting to program every day.
Prog
Press
OK
the button to confirm
Period 1 settings are now displayed
Use the
+
and
-
buttons to select the time that
you would like the heater to turn
ON
.
When a time is displayed a triangle appears on the
display below
FROM.
Prog
Press
OK
the button to confirm.
Use the
+
button to select the time that you would like
the heater to return to
STANDBY
The triangle is now displayed below
TO
, indicating the
time the heater is set to revert to
STANDBY
mode.
Prog
Press the
OK
button to confirm
Period 2 settings are now displayed. Repeat the above steps for Period 3 to set the times
that the heater is to turn
ON
and return to
STANDBY
.
If no more On/Standby periods are required for the day, continue to press
is again displayed.
Repeat the above steps for each day heating periods are required.
Prog
Prog
OK
until the Day
To exit to programming mode press
until
EXIT
is displayed on the display.
Prog
OK
until the
DAY
is displayed. Press the button
+
Press the
OK
button to confirm to exit programming
Briefly pressing the
Prog
OK
button when the heater is in
AUTO
Mode will display the time left
in a heating period or the lapsed time until the next heating period starts.
No Pr
is displayed
if no more heating periods are programmed for that day.
8
No. of the
period
