NODOR MO 6800, Инструкция по эксплуатации, Страница: 37 / 49

37
11
IMPORTANT
During use the appliance becomes hot, Care should be taken to avoid touching heating elements
inside the oven.
Accessible parts may become hot during use. Yong children should be kept away.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may result in shattering of the glass.
For a built-in oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture is made of
veneered wood, the adhesives should be able to withstand a temperature of 12 0 ć . Plastic materials or adhesive
which cannot withstand this temperature will b e come deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to make contact with
the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed without the use of a
tool.
Fig.4
Fig.5
70
70
70
Ensure that the appliance is switched off before replacing the la mp to avoid the possibility of electric shock.
CONNECTION TO THE MAINS SUPPLY
THE APPLIANCE MUST BE CONNECTED ACCORDANCE WITH THE RULES CURRENTLY. IT CAN
ONLY BE HANDLED BY AN AUTHORIZED ELECTRICAL INSTALLER IF IN
FORCE.
12
WARNING: THIS APPLIANCE MUST BE EARTHED
- Check that the power rating of the mains supply and of the sockets are suitable for the maximum power of the
appliance as indicated on the specification plate.
- plug should be accessible after inst all ation. Fit the plug into a socket fitted with a third contact which correspond s
with the earth connection. This should be properly connected.
- If the appliance just fitted with supply leads but do es not come already fitted with a plug, then permanently connect
to fixed wiring as follow:
- The “yellow /gr een” earth wire, which must be connected to terminal, ha s to be about 10mm longer than the other
wires; the “ b lue” neutral wire has to be connected to the terminal marked with letter N.
“ Black, brown, re d” li ve wires ha ve to be connected to terminal L. Mains connection can also be made by fitting a
double pole switch with a minimum gap between the contacts of 3mm, proportionate to the load and complying
with the regulations in force.
The yellow/green earth wire should not be controlled by the switch.
The plug or a double pole switch used for mains supply connection should be easy to get at, once the appliance is in
position.
IMPORTANT :
position the mains supply cab le so that it is ne ve r subjected to a temperature which is
more than 50 ć above ambient temperature.
- The electrical safety of the appliance can only be guaranteed when it has been correctly connected to an efficient
earthed power supply, as laid down in the regulations for electrical safety.
- The manufacturer cannot be held responsible for any damage to persons or objects due to lack of an earth
connection.