17
ND-STIRETTA YOUNG User Manual
Note: During ironing, the temperature indicator goes on from time to time.
This indicates that the iron is heating up to the set temperature.
Note: The system may occasionally produce a pumping sound during steam
ironing. This is normal and tells you that water is pumped into the soleplate.
7. Press the steam trigger to release steam for ironing. During operation, if
you need to remove hard crease, continuously press the steam trigger twice
and then you can iron the cloth with shot of steam.
Caution:
1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
3) The supply cord may become hot during a long ironing session.
4) The appliance may not release steam if appropriate soleplate temperature
has not achieved or correct temperature setting has not been selected. (There
is no steam released under temperature setting 1 and 2.)
5) The water tank may need to be refilled if the pump produces larger noise.
8. After ironing, you can put the iron on the thermal insulating cushion.
Remove the plug from the wall socket. But the soleplate is still hot, so never
touch it with hand, place it on the thermal insulating cushion until it cools
down completely.
9. And you can hold the iron in vertical position and press the steam trigger to
iron hanging curtains and clothes (jackets, suits, coats).
NOTE: Do not continuously operate the appliance for 1 hour.
11. The iron has an anti-drip function. When the temperature is lower than the
selected temperature, no matter if press down the steam trigger or not, the
iron will stop spraying steam automatically to avoid water droplets coming
out from the soleplate.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cools
down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a
non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the
soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on
the steam station iron and the thermal insulating cushion with dry cloth.
3. When do not use the appliance for a long time, pour out the water in the
tank, and store the iron on the thermal insulating cushion.
