14
ND-FRULLY500 User Manual
seconds and then release, the knob will reset to O position automatically. Operate several
times until get the effect you want. If you want to add ingredients while the blender is working,
just open the measuring cup and lid (See Fig.7).
8. When the effect you desire is obtained, turn the knob to O position.
Note:
1) For each use, the consecutive operation time should not exceed 3 minutes, and at least 10
minutes rest time must be maintained between two continuous cycles.
Please let the unit cool to room temperature before performing next operation cycle.
2) If you want to stop the machine during operation, just turn the knob to O position anytime.
Important operating tips
1) For best circulation of food that is to be blended with some liquid. pouring the liquid into the
jar first, then add solid food.
2) Some of the tasks that cannot be performed efficiently with a blender are: beating egg
whites, whipping cream, mashing potatoes, grinding meat, mixing dough, extracting juice
from fruit and Vegetables, etc.
3) The following items should never be placed in the unit as they may cause damage: bones,
large pieces of hard things, frozen food, or tough foods.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Before cleaning, unplug the blender.
2. For easier cleaning, please always wash immediately after using. Don’t let food dry on the
jar assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds.
And then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit, to detach the blade
assembly by turning it clockwise from the jar base bottom, and remove the seal ring and
blade assembly (see fig.8).
fig.8
