Install the two L -shaped brackets in the accessories on both sides of the switch panel and fix them
with the screws provided in the accessories.
The switch is placed in position within the frame, is supported by the carriage; screw the L -shaped
bracket fixed to the fixed rack guide slot ends, the switch to ensure a stable, horizontally mounted
on the machine frame,
Good grounding of the rack is an important guarantee for antistatic, anti-leakage, lightning
protection and anti-interference of the equipment. Therefore, ensure that the grounding wire of
the rack is properly installed.
The equipment installed in the rack is generally from bottom to
top to avoid overload installation;
Avoid placing other heavy objects on the surface of the switch to avoid accidents;
Ensure heat dissipation and air circulation.
3.3 Login management interface
Step1
Connect the network cable connected to the computer to the RJ45 port of the switch when the
equipment is working normally
Step2
Manually change the computer IP address to 192.168.254.X (X is 2~254), and the subnet mask:
255.255.255.0
Note
:
