EZ-Leveler II (EZ-L II) allows fine level adjustment of the mounted device. By simply
turning 3 rollers, adjustment of the level is easy and smooth. There are locking
knobs to cancel out backlash and prevent accidental change of level. It is
lightweight, compact, and smartly shaped to minimize the nadir footprint when
taking spherical panoramas. Its "Head Alignment Knob" allows a pano head with an
indexed rotator to point in any direction without moving the tripod. Alternatively, it
allows aligning of EZ-L II edges to the tripod legs to minimize the nadir footprint.
NOTE: EZ-L II does not incorporate its own bubble level. It requires the
mounted device to have a bubble level or other level reading capability.
Stand in a position so that 2 rollers (
1
and
2
) are horizontal in front of you.
Look at the bubble from vertically
above. Adjust the horizontal rollers to
center the bubble horizontally.
© 2012 Nodal Ninja
Quick Reference Guide
EZ-Leveler II
Package Contents of EZ-Leveler II
Features
Support: www.nodalninja.com/forum
Tutorials: www.youtube.com/nodalninja
Store: store.nodalninja.com
3/8” Socket
Leveling
Roller
Level Lock
3/8” Thread
Installation and Level Adjustment
Head Alignment Knob
Install the 3/8” to 1/4” adapter if the
tripod has a 1/4” thread. If tripod top
plate has bare metal surface, consider
adding a friction material to prevent
loosening and/or scratching the base
of EZ-L II. An optional cork sheet like
t h a t o n E Z - L I I i s a v a i l a b l e f r o m
Fanotec.
Place the tripod legs in their preferred
positions. Unlock the level locks. Turn
the rollers to roughly the middle of
their full adjustment range. Tighten the
“Head Alignment Knob” (HA Knob) of
EZ-L II to the base. Tighten EZ-L II to
tripod while holding the knob with
fingers.
Mount the tripod head or ball head on
EZ-L II. Mount the camera on tripod
head or ball head. Then roughly level
(bubble inside or on the circle line) the
t r i p o d h e a d u s i n g i t s o w n t i l t
adjustment or by adjusting the length
of tripod legs. This prevents EZ-L II
from going out of adjustment range.
1
2
4
Adjust roller
3
to center the bubble
vertically. If this fails due to poor initial
l e v e l i n g , a d j u s t r o l l e r s
1
a n d
2
s i m u l t a n e o u s l y t i l l t h e b u b b l e i s
centered horizontally and vertically.
Then lock the level locks to prevent
accidental change of level.
3
Install 3/8” to 1/4”
Adapter as Needed
Tighten HA Knob
to the Base
Tighten HA Knob
to the Base
Lock
Unlock
Unlock
Turn to
Adjust
Level
Spare Parts
Qty
3/8" to 1/4" adapter
1
1
2
3
Horizontal to Viewer
Horizontal to Viewer
Centered Vertically
1
2
3
Top View
2
2
3
Top View
Centered Horizontally
1
Level
Level Roughly
by Adjusting
Tripod Legs
5