Removing the stock retention module -
Putting the backplate in place
1
Please first choose the correct set of plastic spacers and the correct
set of holes on the mounting bars depending on whether you are
using a socket AM4 or a socket AM2(+)/AM3(+)/FM1/FM2(+)
motherboard:
Required mounting parts:
If your motherboard comes with a pre-installed CPU cooler
retention module, please first remove it by unscrewing it from the
backplate. The SecuFirm2™ mounting system will install directly
to the stock backplate, so please keep it in place.
If your motherboard does not come with a pre-installed CPU cooler
retention module, the AMD stock backplate should be included with
the motherboard accessories. Please put the backplate on the rear
side of the motherboard so that the screw threads of the backplate
stick through the mounting holes of the motherboard as shown
below. If your motherboard does not include a stock backplate,
please contact Noctua customer support at [email protected].
AMD stock backplate
(included with the motherboard)
Attaching the mouting bars
2
NM-APS5 (white)
AM2(+)/AM3(+)
FM1/FM2(+)
NM-APS4 (grey)
AM4
Use the grey NM-APS4 spacers for AM4 and the white NM-APS5
spacers for AM2(+)/AM3(+)/FM1/FM2(+).
Use the set of holes marked with “4” for AM4 and the set of holes
marked with “3” for AM2(+)/AM3(+)/FM1/FM2(+).
This manual will guide you through the installation process of the
SecuFirm2™ mounting system step by step.
Prior to installing the cooler, please consult the compatibility list
on our website (www.noctua.at/compatibility) and verify that the
cooler is fully compatible with your motherboard. Please also make
sure that your PC case offers sufficient clearance for the cooler and
that there are no compatibility issues with any other components
(e.g. tall RAM modules). Double check that the heatsink and fan
clips do not make contact with the VGA card or other PCIe cards.
Noctua cannot be held responsible for any damage or losses caused
by compatibility issues. Should you encounter any difficulties,
please check the FAQs on our website (www.noctua.at/faqs) and
don’t hesitate to contact our support team at [email protected].
Multilingual versions of this manual are available on our website:
www.noctua.at/manuals
Dear customer,
Congratulations on choosing the Noctua NH-L12 Ghost S1 edition.
Our classic NH-L12 has proven to be the best air cooling
solution for Louqe’s award-winning Ghost S1 enclosure. With its
single 92mm fan, the new Ghost S1 edition is tailored for use
in this case and has been updated with the latest SecuFirm2™
mounting hardware for all current mainstream sockets. Topped
off with our further improved NT-H2 thermal compound and a full
6-year manufacturer’s warranty, the NH-L12 Ghost S1 edition is
the ideal choice for premium grade quiet builds in the Louqe Ghost
S1 chassis. Enjoy your NH-L12 Ghost S1 edition!
Yours sincerely,
Roland Mossig, Noctua CEO
AMD
!
4x NM-APS4
plastic spacers for
AM4
4x NM-ALS1
long screws
4x NM-APS5
plastic spacers for
AM2(+)/AM3(+)
FM1/FM2(+)
2x NM-AMB10 mounting bars
2x NM-AMB11 mounting bars
Choose either the short NM-AMB10 or the long NM-AMB11 mounting
bars according to the desired final orientation of the cooler.
NM-AMB10
Orientation NM-AMB10
Orientation NM-AMB11
AM4
First put the plastic spacers onto the screw threads of the backplate,
then fix the mounting bars using the four long screws.
AM2(+)/AM3(+)
FM1/FM2(+)
Noctua NH-L12 Ghost S1 Edition| Installation Manual
Scan this code to display multilingual manuals on
you mobile phone.
