background image

Scan this code to display

 

multilingual manuals on

 

your phone.

!

Even with high-grade products and strict quality control, the 
possibility of defects cannot be eliminated entirely. Therefore, 
we aim at providing the highest possible level of reliability and 
convenience by offering a warranty period of 6 years and  
direct, fast and straightforward RMA service. 

Should you encounter any problems with your 
NM-AM5/4-MP83, please don’t hesitate to contact our 
support team at [email protected].

Please also consult the FAQ section on our website: 
www.noctua.at/faqs

  Warranty, support and FAQs

As it is not possible to reliably calculate or control the forces
that act upon a system during transport (e.g. in shipping), we
generally recommend, for safety reasons, taking off coolers 
with a total weight of more than 700g (incl. fan).

If the weight of the heatsink without fan is below 700g and
the total weight including fan is above 700g, we recommend
taking off the fan from the heatsink in order to reduce the 
weight below 700g.

Noctua cannot be held responsible for any damage that may
arise due to excessive stress during transport if you keep the
heatsink installed.

  Transporting your system

!

Reattach the fan(s) to the heatsink (if removed during 
the installation process) and connect the fan(s) to 
the motherboard as described in the cooler manual. 
If you don’t have it at hand, you can download it at: 
www.noctua.at/manuals

  Fan setup

5

  Fastening the heatsink to the CPU

4

Caution: Gently tighten the screws until they stop, but do not 
use excessive force (max. torque 0.6 Nm).

Caution: Applying too much thermal paste will lower heat 
conductivity and cooling performance!

AM4

AM5

Caution: Note that depending on the cooler model, it may 
be necessary to remove the fan(s) in order to reach the 
mounting screws.

If you’re using the cooler for the first time, please also take off 
the protection cover at the bottom side of the heatsink first! 

Then put the heatsink onto the CPU and screw it to the screw 
threads of the mounting bars. Perform 2-3 turns on each 
screw, then repeat until both are fully tightened.

NOCTUA NM-AM5/4-MP83 
INSTALLATION MANUAL

Отзывы: