
NOBU Fanless Inwall Touchscreen PC
N12WTS
v3.42
- 18 -
Aluminum Bezel
The bezel is made from aluminum. Thus it can be very sensitive to chemical
damage as well as scratches and dents. The bezel should be removed from
the face of the unit before cleaning. The bezel should be cleaned with
normal dish soap and water with a soft sponge. If a stronger cleaning
solution is needed, then isopropyl alcohol can be used with a soft cloth. Over
time with normal use, the bezel may become scratched and need to be
resurfaced. This service can be performed at the Nobu factory for a small
charge or can be done by the owner with the appropriate abrasive materials
which are also available from Nobu.
Case
Over time some dust may collect near or on the I/O ports on the top of the
unit. The unit can be cleaned with compressed canned air or dusted with a
light brush. The unit should be disconnected from any power source before
cleaning.
Содержание N12WTS
Страница 1: ......
Страница 10: ...NOBU Fanless Inwall Touchscreen PC N12WTS v3 42 9 Figure 1 3 Temporary Power Cord...