Nobu GR-10L, Руководство пользователя

Страница: 19 / 64

19
OPERATING THE UNIT
Remove the
rubber plug
Insert the
water hose
from the
drain outlet
Do not block water flow by a rise.
Do not block water flow by a retortion.
Fig. 8
Fig. 9a
Fig. 9b
2. Continuous draining
•
Water can be automatically emptied into a floor drain by
attaching the unit with a water hose
(Φ16.5*13.5mm) (not included).
•
Remove the rubber plug fromthe back of the unit and
store it in a safe location.
•
Insert the water hose into the unit from the drain outlet in
the back of the unit as shown in Fig.8. Attach the water
hose to the drain hose outlet of the unit. Make sure the
connection of the water hose and the drain hose outlet
of the unit is tight and does not let the water leak.
•
Then lead the water hose to the floor drain or a suitable
drainage facility.The drainage facilify should be lower
than the drain outlet of the unit.
•
Be sure to run the water hose sloping downward al-
lowing the water to flow out smoothly. Do not install the
water hose as shown in Fig.9a and Fig.9b.
•
When you remove the bucket,if there is some water
inthe unit you must dry it.
NOTE: When the continuous drain feature is not being
used, remove the drain hose fromthe outlet and attach
the rubber plug back into the drain outlet.