Nobles SPEEDGLEAM 5, Руководство оператора

Страница: 12 / 97

OPERATION
12
Nobles SpeedGleam 5 / 7 (01- 2014)
4. The check dust bag indicator will periodically light
up on the control console alerting operator to check
bag for fullness. Replace the bag when it becomes
half full (Figure 13). Restart the key to reset the
check bag indicator.
FIG. 13
5. The HEPA filter requires to be replaced every 200
hours of use (Figure 14).
FIG. 14
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE- OPERATION
-
Sweep floor and remove any obstructions.
-
Scrub floor from any soil buildup.
-
Check that the floor surface is dry.
Do not use machine with spray buffing solution.
-
Check battery discharge level indicator.
-
Select proper burnishing pad.
-
Check condition of burnishing pad.
-
Check dust collection bag for fullness.
-
Check vacuum hose connection at bag compartment.
-
Check machine for proper operation.
OPERATING THE MACHINE
1. Lower the burnishing head to the floor by releasing
the burnishing head lift pedal as shown (Figure 15).
FIG. 15
2. Release the parking brake lever if equipped
(Figure 16)
3. Turn the key to the on ( I ) position (Figure 16).
FIG. 16
4. For drive models, push the directional lever to the
forward position (Figure 16). To reverse machine pull
the directional lever backwards. The burnishing head
will lift off the floor when reversing machine.
FORWARD
REVERSE
FIG. 17