OPERATION
Power Eagle
t
716 (08--05)
9
CLEANING CARPETS
1. Turn on Master switch (Figure 3).
FIG. 3
2. Press and hold in Carpet Cleaning button. Pull
machine towards you, 1219 mm (4 ft) at a time.
For best cleaning results, lift machine handle
slightly while pulling backward. This transfers
weight of machine to the pickup head for best
water recovery (Figure 4).
FIG. 4
3. At end of path, release Carpet Cleaning button,
pull machine towards you another 305 mm (1 ft) to
vacuum excess spray. Push down on handle and
move to next area to be cleaned. Overlap each
path by 50 mm (2 in).
WARNING: Fire Or Explosion Hazard. Do Not
Pick Up Flammable Materials Or Reactive Metals.
WHILE OPERATING
1. If necessary, adjust brush height to accommodate
type of carpet (See ADJUSTING BRUSH
HEIGHT).
2. Work away from wall outlet and power cord to
prevent cord damage.
3. Check for excessive foam buildup in recovery
tank. Use a recommended foam control solution to
prevent motor damage (Figure 5).
FIG. 5
ATTENTION: Do not allow foam to enter vacuum
screen. Damage to vacuum will result. This
damage is not covered by warranty.
4. If brush or vacuum motor should stop, circuit
breaker may have tripped. Turn off machine,
unplug power cord and check for any obstructions.
Let motor cool and manually reset circuit breaker
button, located on bottom of switchbox
(Figure 6).
FIG. 6
WARNING: Electrical Hazard. Unplug power
Cord Before Servicing Machine.
WARNING: Spinning Brush. Keep Hands
Away. Turn Off Power Before Working On
Machine.
