11
b.
Lifting/transportation
For transporting, remove the load, lower the forks to the lowest position and fix the truck safely with
dedicated lifting gear according to the following figures.
Lifting
USE DEDICATED CRANE AND LIFTING EQUIPMENT
DO NOT STAND UNDER THE SWAYING LOAD
DO NOT WALK INTO THE HAZARDOUS AREA
DURING LIFTING
Park the truck securely and lash the truck according to the points
identified in fig. 5. Lift the truck to its destination and place the truck
securely before removing the lifting gear. Use the lashing points
according to the fig. 5.
Transportation
DURING TRANSPORTATION ON A LORRY OR TRUCK ALWAYS FASTEN THE
TRUCK SECURELY
Lower the forks and park the truck securely.
Fasten the truck according to fig. 5 by fixing dedicated lashing belts to each side of the trucks crane
hook holes and fasten the other side to the transporting truck.
c.
Decommissioning
For storage, remove the load, lower the truck to the lowest position, grease all in this handbook
mentioned greasing points (regular inspection), eventually protect the truck against corrosion and dust.
Remove the batteries and jack the truck safely, so that there will be no flattening after storage.
For final decommissioning hand the truck to a designated recycling company. Oil, batteries and electric
components must be recycled due to legal regulations.
5. DAILY INSPECTION
This chapter describes pre-shift checks before putting the truck into operation.
Daily inspection is effective to find the malfunction or fault on this truck. Check the truck on the following
points before operation.
Remove load from truck and lower the forks.
DO NOT USE THE TRUCK IF ANY MALFUNCTION IS FOUND.
•
Check for scratches, deformation or cracks.
•
Check if there is any oil leaking from the cylinder.
•
Check the vertical creep of the truck.
Fig.5 Lifting with a crane
