Noblelift PS E12BSL, Инструкция по эксплуатации

Страница: 20 / 40

18
•
There is leg injury risk when replacing the forks.
•
It
’s forbidden to pull the fork to the direction of the operator.
Operation steps:
→
Remove the safety bolt (33).
→
Release fork positioning device (34).
→
Move the forks to the center of fork holder and remove the forks through the groove.
l. Leg adjustment
•
Not fixed and not properly adjusted legs can lead
to dangerous accidents.
•
There is leg injury risk when adjusting the legs.
•
Tighten the positioning bolt (39) after adjusting
the legs.
•
When adjusting the legs, please pay attention
that the number of positioning holes (38)
exposed on each side of the legs should be same.
(as shown in Fig. 14, if one side has 4 positioning
holes(38), the other side should also be 4).
Operation steps:
→
Park the truck securely according to the regulations.
→
Turn clockwise the supporting assembly(36) on both
sides of the truck until jacking up the truck.
→
Screwed out the positioning bolt (39).
→
Adjust the leg (37) until the corresponding positioning hole (38) is adjusted to the underface of the
positioning bolts (39).
When adjusting the legs, please pay attention that the number of positioning holes (38) exposed on
each side of the legs should be same. (as shown in Fig. 14, if one side has 4 positioning holes(38),
the other side should also be 4).
→
Screw the positioning bolt (39) tightly.
→
Turn anti-clockwise the supporting assembly (36) on both sides of the truck until the supporting
assembly can
’t be turned anymore.
Fig.14: Adjust the legs