13
6. OPERATION INSTRUCTIONS
BEFORE OPERATING THIS TRUCK, PLEASE
FOLLOW
THE
WARNINGS
AND
SAFETY
INSTRUCTIONS (CHAPTER 3).
BEFORE OPERATING THIS TRUCK, ENSURE
THAT THE LOAD OR OTHER EQUIPMENT NOT
CAUSES INSUFFICIENT VISIBILITY!
Make sure that the load is palletized and stable and that the
daily inspection is carried out. For starting, insert the key and
turn it clockwise to
the “ON”- position. Eventually before
inserting the key switch, the emergency button (6) must be
pulled carefully.
Press the horn button (21) to activate the audible warning signal
a. Parking
DO NOT PARK THE TRUCK ON INCLINED SURFACES
The truck is equipped with an electromagnetic failsafe stopping and parking brake.
Always lower the forks fully and drive the truck to a safe area. Turn the key anti- clockwise to the
“Off” –
position and remove the key.
b. Residual lift diagram
The residual lift diagram indicates the maximum capacity Q [kg] for a given load centre c [mm] and the
corresponding lift height H [mm] for the truck with horizontal load.
The white markings on the mast indicate if the specific lifting limits reached. For instance with a load
centre of gravity distance c of 600 mm and a maximum lift height H of 3600 mm, the max. Capacity Q is
800 kg.
Fig.7: Tiller operating controls
Fig.8: Key switch
Fig. 9: Residual lift diagram