manualshive.com logo in svg

Noble HT-180 HH, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Noble HT-180 HH Скачать руководство пользователя страница 17

07610-004-26-29-E

10

INSTALLATION INSTRUCTIONS

INSTALLATION & OPERATION

The water supply line is to be capable of 20±5 PSI “

fl

 ow” pressure at the recommended temperature indicated on the data 

plate. Take care not to confuse static pressure with 

fl

 ow pressure: Static pressure is line pressure in a “no 

fl

 ow” condition (all 

valves and services are closed); 

fl

 ow pressure is the pressure in the 

fi

 ll line when the valve is opened during the cycle. It 

is suggested that a shock absorber (not supplied) be installed on the incoming water line. This prevents  water hammer (hydraulic 
shock)—induced by the solenoid valve as it operates—from causing damage to the equipment.

PLUMBING CHECK: 

Slowly turn on the water supply to the machine after the incoming 

fi

 ll line and the drain line have been 

installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in operation.

ELECTRICAL POWER CONNECTION:

 Electrical and grounding connections must comply with the applicable portions 

of the National Electrical Code ANSI/NFPA 70 (latest edition) and/or other electrical codes. Disconnect electrical power 
supply and place a tag at the disconnect switch to indicate that you are working on the circuit. The dishmachine data plate 
is located on the right side and to the front of the machine. Refer to the data plate for machine operating requirements, 
machine voltage, total amperage load and serial number. To install the incoming power lines, open the control box. This 
will require taking a Phillips head screwdriver and removing the four (4) screws on the front cover of the control box. Install 
3/4” conduit into the pre-punched holes in the back of the control box. Route power wires and connect to power block 
and grounding lug. Install the service wires (L1, L2, & L3 (three phase only)) to 
the appropriate terminals as they are marked on the terminal block. Install the 
grounding wire into the lug provided. Tighten the connections. It is recommend-
ed that “DE-OX” or another similar anti-oxidation agent be used on all power 
connections.

VOLTAGE CHECK:

 Ensure that the power switch is in the OFF position and ap-

ply power to the dishmachine. Check the incoming power at the terminal block 
and ensure it corresponds to the voltage listed on the data plate. If not, contact 
a quali

fi

 ed service agency to examine the problem. Do not run the dishmachine 

if the voltage is too high or too low. Shut off the service breaker and mark it as 
being for the dishmachine. Advise all proper personnel of any problems and of 
the location of the service breaker. Replace the control box cover and tighten 
down the screws.

Power Block

Ground Lug

Incoming Power Connection

Содержание HT-180 HH













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды