There are 2 (two) sub steps as below:
15.1:
With assistance from your adult partners, slowly and carefully,
stand up the
FACE 2 - Pergola Panel
in
Step 14.
15.2:
Repeat this step with other side to stake into the ground,
FACE 4 - Pergola Panel.
This Pillar Panel would require 4 (four) pcs of Garden Stakes ( NOT provided)
per Pillar that needs to be staked into the ground to keep the Pillar affixed
into the ground.
Next, proceed to stake the
FACE 2- Pergola Panel
into the ground at your marked
ideal location.
Using a
Hammer or a Mallet
, gently hammer the
Garden Stakes, between
70% to 80%
into the ground,
as pictured above.
The posts should be at right angle, cannot be tilted or slanted.
This Garden Stakes Hardware - are NOT provided.
The above Garden Stake visual hardware is for illustration purpose and is for
Grass Ground Surface only.
Garden Stake or Post Mounting Hardware on NON GRASS GROUND
surface is NOT INCLUDED / NOT PROVIDED in this kit.
You need to confirm with your
Local Hardware Store
to determine the
26 OF 34
correct hardware, on other surfaces.
NOTE 11:
NOTE 10:
