Place the Bar Chair on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Bar Chair to some 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Bar Chair freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the Bolts, Screws and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles found, proceed to tighten all the Bolts and Screws.
When tightening the Bolts and Screws, tighten sequentially.
DO NOT tighten any Bolt or Screw fully and then move on towards the next one.
This would cause the frame to warp.
If there are still wobbles, loosen the Bolts and Screws and execute this same drop test.
Step 5
Your Bar Chair is now ready for use.
This Bar Chair can only be used on a flat, level surface.
Step 4
5
A
B
Noble house Home Furnishings LLC
Page 5 OF 6
