Noble House Home Furnishings 74173.00-40K, Инструкция пользователя

Страница: 21 / 25

Part K.
SAFETY INFORMATION
USING YOUR FIRE TABLE
I
COLUMN
Before each use, inspect the Gas Hose (12). Replace Gas Hose(12) if there are any signs of cutting, wear
or abrasion.
Before you light your Fire Table
I
Column, please proceed
I
adopt the following steps :
1. Make sure the Control Knob (13) is in the
“
OFF
”
position.
2. Open the Door (07) and slowly open the Gas Valve ( 22) on the Propane Gas Tank by turning the
Contol Knob (13) counterclockwise.
3. Close the Door (07) on the Main Frame (06) of the Fire Table
I
Column.
4. Push and hold in the Electronic lgnitor (14 ) to create sparks within the electrode continue to hold.
5. Push in the Control Knob (13) and turn to the
“
LOW
”
position.
Keep holding down the Control Knob (13) to allow gas to flow for 15 seconds.
6. If ignition doesn't occur within a few seconds release the Control Knob (13) and rotate to the
“
OFF
”
position.
Wait for 5 minutes for gas to clear and then repeat the above lighting instructions.
7. Once the Fire Table
I
Column is lit, the flame intensity may be controlled by turning the Control Knob
(13) between the “LOW
”
and “HIGH
”
positions.
8. Observe flame height when lit:
2 i1nches to 10 i ncnes.
8.1. ) Flame color should be yellow
I
blue.
8.2. ) Flame height burns at 2 - 10 inches high.
Noble house Home Furnishings LLC
21