22.1)
Drill two holes on the wall at the same height as the Metal Brackets on the 4 Drawer
Chest using a Power Drill (S).
Mark the holes by measuring the height of the Metal Brackets with a ruler/measuring tape
and mark on the wall to keep them accurate and at the same height.
Note: The Metal Brackets need to be secured to a solid, load bearing surface. Please
use a Stud Finder(not supplied) if needed to locate the Wall Frame.
22.2)
Insert Wall Plugs (T) into the drilled holes on the wall with Hammer (R).
Step 22
22.2
22.1
T
S
R
Noble house Home Furnishings LLC
Page 23 OF 26
