Nobeltec InSight GPS-50W, Руководство пользователя

Страница: 11 / 18

7
Nobeltec InSight 50-W User Guide
The GPS/Port Setup Wizard
If you plan to use the InSight GPS 50-W with Nobeltec Navigation Software, you will need
to run the GPS/Port Setup Wizard before using the software to receive GPS transmissions.
To initialize the InSight GPS 50-W for use with Nobeltec Navigation Software:
Connect the GPS to your computer. This device uses a Serial port. If your computer
does not have Serial ports, Nobeltec recommends that you use SeaLevel® Serial-to-
USB port adapters (available from your Nobeltec product retailer) to connect to the
GPS Antenna.
Make sure the GPS is installed, powered on and connected to the network or PC
before commencing setup. You can use Windows HyperTerminal to verify that the
GPS is sending data to your PC.
From your computer desktop, select
Start | Programs | Nobeltec | GPS Port Setup
Wizard .
When the Nobeltec GPS/Port Setup Wizard pop-up appears, click
Next
.
The GPS/Port Setup Wizard searches all available Serial Ports for devices.
If you have connected the GPS to the computer on a specific port and GPS/Port Setup
Wizard does not recognize the data, click the View button next to that port. If the
data is garbled or unreadable, contact Nobeltec Technical Support to troubleshoot
your issue.
Follow the remaining onscreen instructions to complete setup.
3
Nobeltec Navigation Software