IPS CaseDesigner® workflow steps:
The patient undergoes a scan according to the scanning protocols defined for
IPS CaseDesigner®. The models are scanned in final occlusion. Both parts of the dental
cast are also scanned, individually but within one DICOM set. The resulting DICOM files
are used to create the patient model, surgery models, occlusion models and skin.
Diagnostic tools are available for the user to indicate the mandibular nerve or to measure
distances, angles or values. A cephalometric framework allows the user to indicate the
landmarks to be used in the cephalometric analysis.
With the surgery tools the virtual model can be osteotomized according to different
osteotomy types, including Le Fort I, sagittal split, ramus, segmental and chin
osteotomies. The movements of the different bone segments can be simulated. A
surgical splint file can be created and the list of osteosythesis plates can be consulted to
select the plates to be used in the surgery.
For more detailed information on how to perform specific actions, please refer to the help
files that can be accessed via the IPS CaseDesigner® software.
If you wish to have a printed hardcopy of the IFU, please contact customer support.
2/2
GMT 64638
Manufacturer:
Nobel Biocare AB,
Box 5190, 402 26
Västra Hamngatan 1, 411 17
Göteborg, Sweden
Phone: +46 31 81 88 00. Fax: +46 31 16 31 52.
www.nobelbiocare.com
Canada license exemption:
Please note that not all products may have been licensed in
accordance with Canadian law.
For Prescription Use Only
Consult instructions for use
08/10/2019 All rights reserved.
Nobel Biocare, the Nobel Biocare logotype and all other trademarks used in this document
are, if nothing else is stated or is evident from the context in a certain case, trademarks of
Nobel Biocare. Product images are not necessarily to scale.
