noax N11, Руководство пользователя

Страница: 28 / 120

User Manual N11
Installation Industrial PC
www.noax.com
Page 28 of 120 3085-US-2.4
8 Installation
You can find more information about connector protections and various device brack­
ets on our website
www.noax.com
.
8.1 Installation location
The Industrial PC is designed for harsh operating conditions.
Nevertheless, please observe the following rules for installation:
D
Avoid exposing the display to strong direct sunlight since it will make reading much
more difficult.
D Do not expose the Industrial PC to direct heat.
Make sure that there is sufficient ventilation at the rear panel or rather at the cooling
fins on the rear panel.
The device will automatically turn itself off when it overheats or the temperature
falls below a certain point.
D
For panel devices (front installation) allow extra space all the way around the rear
housing and at least 15 mm more depth to ensure sufficient air circulation.
D
Do not install the Industrial PC on equipment that strongly vibrates.
If this is unavoidable, the device should be installed on shock absorbers and/or
vibration dampers.
D
In order to install the device on forklifts or similar vehicles, you
must take addi­
tional measures for shock damping and vibration minimization.
We have some device brackets designed specifically for this purpose in our acces­
sories range. “Modification for mobile operation” (= additional securing of connec­
tors and cables) is also available as an option.
D
The Industrial PC may only be operated in positions ranging from 90° upward to the
normal position (= facing forward) to 90° downward. The display is the point of
reference.
For more information on this, see also technical data in chapter 15.1.2.