manualshive.com logo in svg

Noark Electric Ex9EMS 1P 2M 100A 1T, Руководство пользователя

Поделиться
Скачать
Noark Electric Ex9EMS 1P 2M 100A 1T Скачать руководство пользователя страница 6

5.1 Energy flow indication

The red LED on the front panel indicates the power flow measured by the meter. When power flows, the LED will flash. The faster 

the LED flashes, the more power flows. For this meter, the LED will flash 10.000 times per kWh. The first display indication of the 

meter in the scrolling mode is either FW (forward) or RV (reverse).

5.2 Reactive energy indication

The display will show kvarh to indicate the meter is measuring reactive energy. 

5.3 Tariff indication

The LCD will show T2 in the right upper corner to indicate tariff 2 is active.

5.4 Reading the meter

A red LED on the front panel indicates the consumption measured by the meter. When power is consumed, the LED will flash. 

The faster the LED flashes, the more power is consumed. For this meter, the LED will flash 10.000 times per kW.

The meter is equipped with a 7 digit LCD. For the energy consumption the meter will display 99999.99 kWh and switch to 

999999.9 kWh when over this value and so on.

5.5 LCD display of the meter

The LCD display has three rows. The upper row contains tariff indication, energy flow direction, communication and unit. The 

middle row is used to show the value per unit. The lower row is used to show al other metering info or OBIS codes.

  5 Operation

NOARK  Ex9EMS 1P 2M - 6

Содержание Ex9EMS 1P 2M 100A 1T




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды