NOAH ACTUATION SA003 Series, Руководство пользователя

Страница: 8 / 12

8
Emico Noah
NOAH ACTUATION CO.,LTD.
10. Manual Operation
11. Limit Switch Setting
11-1
Cam Switch Calibration
10-1 Remove the manual sealing bolt using
the wrench attached on the bottom of the actuator.
10-2 Turn the wrench to the clock wise for opening and
count clock wiser for closing inserting the wrench.
10-3 Screw up the manual sealing bolt to protect the actuator
from leakage and put the wrench in its regular place
after use not to lose.
11-1-1
Loosen the close cam set screw and rotate the
cam in a clockwise direction to actuate the close
limit switch. Also, the close auxiliary switch cam
can be adjusted at this way too.
11-1-2
Firmly tighten the cam set screws.
11-1-3
To set the open cam switches, repeat the previous instructions except rotate the actuator to the open,
counter clockwise position and rotate the open cams in the counter clockwise direction to actuate
the open switches.
ACLS
AOLS
OLS
CLS
Dry Open Limit Switch
Dry Close Limit Switch
Open Limit Switch
※ L-wrench Size: 2.5mm
Close Limit Switch
AOLS
OLS
ACLS
CLS