NOA STUDIO, Руководство по сборке

Страница: 9 / 10

noahome.com
Revise lowest height: Under the reset condition
which shows “RST”, press the M button for 5 seconds.
The height is displayed and flashes. Press up or down
to adjust the appropriate height. 5 seconds after
releasing the button, the digital display will go back
to RST which means the change has been saved.
Long press for 5 seconds
Switch between memory inching / continous moving:
Under the reset condition “RST”, press button “1”
for 5 seconds which allows to switch between
inching and continuous.
When it shows “10.1”, continuous moving is displayed.
When it shows “10.2”, inching moving is displayed.
Long press for 5 seconds
Centimeter / inch display switch: Under the reset
condition “RST”, press “2” for 5 seconds. You can
switch between inches and cm. When it shows
“10.3”, the height will be shown in cm. When
it shows “10.4”, the height will be shown in
inches.
Long press for 5 seconds
Lock:
Press the M button, the digital tube will show “S-”.
Press the M button for 5 seconds, the display will
show numbers. Press the M button for 3 seconds
until it shows LOC. The buttons on the hand
controller are now locked.
Long press for 8 seconds
Unlock:
Under the LOC condition, press the M
button for 8 seconds until numbers are displayed.
Buttons on the hand controller are now unlocked.
Delete limit position: Press the M button. The digital
tube shows “S-”. Release the button. Press the M
button again for 2 seconds until it shows “555”.
The upper and lower limits have been deleted.
Long press for 2 seconds