No-Match Atom, Руководство пользователя

Страница: 3 / 9

Indicating lights:
Blue, Red & Purple
Battery type:
Built in 18650 battery - more than 20A discharge.
Charging instructions:
Charge inside LiPo Charging Bag and use a
No-Match Mains-USB 5V 1A charger (not supplied) or a suitable computer USB
port.
Size:
32 * 23 * 130 mm
Charging Time:
Up to 4 hours (DO NOT CHARGE FOR MORE THAN 4 HOURS)
Tank/Atomiser
Resistance:
0.6Ω, 1.0Ω ( spare included coil ) (0.3Ω available separately)
Capacity:
<2.0ml
Construction:
100% USA made Kanthal wire, 304 stainless steel +
Borosilicate glass, 100% Organic Cotton.
Battery
Output power:
50W Max
Supported coil resistance range:
0.3Ω ~ 3.0Ω (Please note some
atomisers may require more power even if they fall within this range.
Please check your manufacturers instructions)
output.
Low voltage:
If the voltage gets lower than 3.3v the red light will flash 15
times and will automatcially cut off the power output.
Over-charging protection:
When the battery voltage reaches 4.25v the
device will stop charging.
Charging indication:
Connect the ATOM battery to a No-Match 5V 1A
charger or a suitable computer USB port and the power status will show:
Red light - The voltage is less than 3.5v
Purple light - The voltage is between 3.5v & 3.8v
Blue light - Voltage is over 3.8v
All lights off - Fully charged (or not connected to charger)
Operating Instructions
On/Off:
Press the vaping button 5 times within 2 seconds to turn on/off
device. The indication light will flash 3 times. The light will illuminate blue
(voltage ≥3.8v), Purple (Voltage 3.5v - 3.8v) or red (Voltage <3.5v)
Vaping:
Press the vaping button and vape. Whilst vaping, the indication light
will illuminate. The light will illuminate blue (voltage ≥3.8v), Purple (Voltage
3.5v - 3.8v) or red (Voltage <3.5v) Release the button and the indicator lights
will turn off.
Short circuit protection:
If a short circuit occurs, when you press the
vaping button the blue/purple/red lights will alternately flash 3 times in
sequence.
Vaping time protection:
If the vaping button is pressed for longer than 10
seconds the red light will flash 8 times and will automatically cut off the power
06
You can start vaping once charging is complete.
Press and hold the vaping button whilst you inhale.
Operation (b)
Place in LiPo Bag
whilst charging
Charge via the No-Match USB Adapter
(Available separately)
05
Operation (a)