NKT Photonics Koheras ADJUSTIK, Руководство по эксплуатации продукта

Страница: 95 / 105

95
B Service and support Information
Servicing the laser
The laser have no user serviceable components. In case of malfunction, contact
NKT Photonics using the support channels in section
“Support contact details”
.
Caution: Do not open the laser’s modules. The laser modules are equipped with
warranty labels (see
Figure 60
) on the covers of the laser chassis. The warranty is
void if the system is opened.
Figure 60 Warranty seal
Caution: The laser contains electro-static discharge (ESD) sensitive components.
To avoid permanent ESD damage, use ESD protection precautions when han -
dling the laser. Always connect the laser’s earth point to a ground earth within
your facility.
Opening the laser
chassis
There are no user serviceable components inside the laser chassis. Should your
laser malfunction, and it cannot be serviced on site, it must be shipped to the
NKT Photonics office in Birkeroed, Denmark.
WARRANTY VOID
IF REMOVED Label
The unit is sealed with a label “WARRANTY VOID IF REMOVED”. It is strictly
prohibited to remove the chassis cover