NKT Photonics Koheras ADJUSTIK HP, Руководство по эксплуатации продукта

Страница: 3 / 115

3
GUIDE OVERVIEW
This product guide is intended to provide functional, operational and installation
information for the Koheras ADJUSTIK and ADJUSTIK HP lasers. The guide is
divided into three sections:
•
Koheras ADJUSTIK (HP) Description - introduces the laser, its functionality,
interfaces and chassis variants.
•
Operating the Laser – – provides information and procedures on how to
connect, configure and manage the laser.
•
Installing the Laser – includes the details on how to install the laser and
connect optional interfaces
Safety
Warning: Do not operate the laser before first reading and understanding all
warnings, cautions and handling information stated within the documents:
Koheras ADJUSTIK Safety, Handling and Regulatory Information
– or –
Koheras ADJUSTIK HP Safety, Handling and Regulatory Information
Note: The paper copy of this document is included with your laser; however, it
can also be downloaded from:
https://www.nktphotonics.com/lasers-fibers/support/product-manuals/
Terminology
This guide may refer to the Koheras ADJUSTIK and ADJUSTIK HP as “the laser”.
In many cases, ADJUSTIK is used to describe both the ADJUSTIK and ADJUSTIK
HP. In other cases where a distinction is required, this guide will make a clear
referral to the actual laser model names.
Target audience
This guide is for technical personnel involved in the selection, planning and
deployment of lasers in laboratory and industrial settings. The guide assumes a
reasonable knowledge level of lasers, photonic principles and electrical interface
connectivity.
Chapters inside
This guide includes the following chapters:
•
Chapter I
“Laser Description”
— Describes the laser including its general
operational principles, management and interfaces.
•
Chapter 2
“Modulation”
— Implementation information for wavelength and
amplitude modulation.