NKT Photonics A301-100-000, Руководство по эксплуатации продукта

Страница: 30 / 47

Device Selector
30
Device Selector
You can find the list of SuperK nodes that CONTROL is currently communicating
with in the Device selector. To manage any device, click on its corresponding
icon. When the icon is highlighted blue, it indicates that the Control panel and
Status panel are displayed for that device. In the device selector list, the VARIA is
represented by the icon shown in Figure 16 .
Figure 16 Device selector icon
Figure 17 shows the device selector list with an VARIA selected, indicated by the
blue highlighting.
Figure 17 Device selector
Address selector
When multiple accessories are used with a single SuperK laser, the laser’s
External bus connects the accessories in a daisy chain topology. For each
device, the address selector wheel must be set to one of 16 (0x0 to 0xF) unique
addresses. Figure 18 shows a case where multiple accessories share the External
bus.
Figure 18 Device selector set to 0xE bus address
Caution: Only turn ON the SuperK laser and External bus connected accessories
after all accessories are configured with a UNIQUE BUS ADDRESS.
2