NKT Photonics A203-000-001, Руководство по эксплуатации продукта

Страница: 55 / 77

55
Control panel
Figure 42 Wavelength sweep
Wavelength sweep example
In Figure 42 , Wavelength sweep mode is set to perform the following sweep:
•
Start wavelength is 400 nm
•
Stop wavelength is 500 nm
•
Step size is 50 nm
•
Step interval is 5 seconds
•
Channel power is 50%
For this example, three wavelengths are repeatedly selected: 400, 450 and 500
nm. The system emits 400 nm for 5 seconds then 450 nm for 5 seconds and
finally 500 nm for 5 seconds before repeating the sweep. You can set the
controls as desired to achieve any sweep possible within the setting limits.