NKE BOX Wi-Fi, Руководство пользователя и инструкция по установке

Страница: 8 / 15

8 33-60-059-002 Box WI-FI user manual
Init Press the Init key
Key press acknowledgement, audible signal
Wi-Fi Wifi transmit
Wifi reception
NMEA In Off: no data coming in the NMEA port
Flashes after each valid NMEA sentence received
Flashes after each non-valid NMEA sentence received
NMEA Out Flashes after each valid NMEA sentence sent on the wired NMEA
port
TOPLINE Flashes quickly if its Topline address is <> 0
Flashes quickly if its Topline address is 0
Fix light: data bus Topline wire is disconnected or «no master »
Flashes every second: interface
’s address is 0 and data bus
Topline wire is disconnected or «no master »
6. USING THE « INIT » KEY

Press and hold 1 sec to display the number of connected devices, up to 5. 1
device is indicated by the « Topline » led lighting red, 2 devices by the
« Topline » and « NMEA Out », 3 devices by the « T NMEA Out +
NMEA In », 4 devices by « T NMEA Out + NMEA In + Wifi » and 5
devices by all led indicators in red.

Press and hold 3 sec followed by OFF and ON to reset all NMEA interfaces.

Press and hold 3 sec will initialise the NMEA input (wire and WiFi), listen to
NMEA sentences for 10 seconds, and then create list and nodes for the
Topline bus (only slave).

Press and hold 6 sec will launch a second NMEA initialisation, and add NMEA
channels without overwriting the existing table. With this function, you can add
NMEA channels coming from the WiFi connection without editing the
configuration of the wired NMEA input.

Press and hold 9 sec to perform a full reset and return to factory settings.