Nke Watteco LWC Server, Руководство пользователя

Страница: 5 / 25

LWC Server User Guide
All Rights Reserved – nke Watteco® LWC Server User Guide
Page 5 of 25
1 I
NTRODUCTION
This document describes all the commands that can be used with the LWC Server (or LoRa USB Dongle) through
the serial port.
In this document can be found the general way of functioning for the LWC Server, the meaning of the leds
colors and the serial port configuration needed by the LWC Server to work correctly.
Then, it will describe the common syntax for the commands (special characters, operators, errors, etc.)
And finally, a complete list of all the available resources will be done with, for each, the command available and
few examples.
2 D
EFINITIONS
“Port” or “Slot”: Index identifying a sensor from 1 to 200
HOST: Computer or any other device hosting and controlling the LWC Server
LWC: LoRaWAN Coordinator, this is the device described in this document. It can be called
LoRa USB Dongle as well
3 O
PERATION
P
RINCIPLE
The LWC server allows to create an interface between a Host (Computer, Box…) and several LoRaWAN
compatible end-devices in a private network.
PC, Box, Router
LoRaWAN End-devices
Compatible
HOST LWC
LWC Server
USB
LWCCLI
End Devices
FIGURE 1 - OPERATION PRINCIPLE SCHEMATIC