www.nkrowing.com.au
12
INSTALL THE MAGNET
1.
Remove and inspect the seat plate to find an appropriate place to mount the magnet.
2.
Use a solvent to clean the area to which you will attach the magnet. This is essential if a
good bond is to be obtained.
3.
Determine the exact location of the magnet assembly on the seat plate. Peel away the
protective layer of the VHB double-sided tape and install the magnet assembly.
4.
If possible, use #8 screws to secure the magnet to the seat plate.
5.
Return the stroke seat to its slide and check that the clearance between the magnet and
sensor is no more than 3/8” (refer to FIG 2). Check also that the magnets pass directly over the
sensor (refer to FIGS 1a, 1b).
INSTALL THE LOUDSPEAKERS
The NK loudspeakers are factory assembled and waterproofed using silicone-based protective
coatings. Rain, fresh water, and salt water should not harm the speakers, but we strongly recommend
that you install and angle the speakers so that any water which gets in can run out again. The plug-in
feature of NK speakers makes replacement very easy.
1.
Install the speakers using #6 x 1/2” panhead screws and the metal bracket (attached to the
speaker). We have supplied SIX screws; you will not use all of them unless you are installing a
three speaker system. Remember, it is best if the speakers are angled downward to let water
run out.
2.
Connect the speakers to the wiring harness. Use the remaining six cable clips to secure the
wiring harness. We suggest you use the #6 x ½” brass screws supplied to fully secure these
clips.
INSTALL THE MOUNTING CUP
Decide where you want to secure the cup and mark off the surface using the cup as a template. Drill
two pilot holes for the #8 x ½” panhead screws and secure the cup. Do NOT over tighten the screws!
This new NK Gear Bag is a great replacement for your old black Cox-
Box Carry Case.
It features multiple compartments with adjustable dividers that can
easily swallow up a Cox-Box, mic, charger, SpeedCoach, Mainte-
nance Kit, tools and more.
Water-resistant construction and sturdy padding throughout will
keep all your gear protected, and a padded shoulder strap lets you
load the bag up and still carry everything hands-free.
Available NOW. Part #0117